Zollex Rust Converter is a rust neutralizing and removal agent — but not just any, it contains zinc ions that convert and eliminate rust from metal surfaces without affecting plastic, PVC, or most paints. It does not damage unrusted steel and is safe for other metals. This is an industrial-grade rust remover that works in 20 minutes for light rust or overnight for heavily corroded metal.

THE BEST BECAUSE:

Zinc ions: protect the metal after treatment.

Fast-acting formula: effectively removes rust.

Safe: for use on plastic, PVC, and most paints.

Easy to use: simple to apply and handle.

Rust inhibitor: prevents new corrosion from forming.

Non-corrosive: does not damage unrusted surfaces or delicate metal parts.

Economical: efficient product usage.

⚙️ Perfect for:

Car parts
Agricultural equipment
Garden tools
Camping gear
Boat parts

The product can be applied with a sprayer or by fully immersing the part in the solution.
Rust removal time depends on the degree of corrosion.

APPLICATION:

Surface Preparation:
Remove loose rust flakes, dirt, oil, or grease from the metal surface using a wire brush, scraper, or degreaser. For best results, clean the area thoroughly but do not polish down to bare metal — surface rust must remain for the converter to react.
Application Method:
Shake the product well before use. Apply Zollex Rust Converter by one of the following methods:
- Spraying: Use a spray bottle for large surfaces or hard-to-reach areas.
- Brushing: For localized application or vertical surfaces, use a nylon or natural-bristle brush.
- Soaking: For small parts with severe corrosion, fully immerse in the solution for more complete coverage.
Reaction Time:
- Light rust: Allow the product to act for 10–20 minutes.
- Heavy rust: Leave on for up to 8–12 hours, preferably overnight.
  Maintain a temperature above +18°C and avoid direct sunlight or drafts for optimal chemical performance.
Rinsing:
After treatment, rinse thoroughly with clean water to stop the chemical process and remove residual rust and product. Dry the surface completely to avoid flash rusting.
Post-treatment:
Once dry, the treated surface can be:
- Left as-is for corrosion protection, or
- Painted, primed, or coated — Zollex Rust Converter creates a suitable base for most finishes.

Important:
Avoid using on hot surfaces or in freezing temperatures. Do not apply to aluminum, galvanized parts, or anodized coatings. Use protective gloves and eye protection during application.